Component Prepreg
-
![]()
SCE120
Type: Toughened epoxy
Bio resin content: 0%
Initial cure Temp: 120°C
Minimum cure: 60 minutes
Service Temp: 120°C
Outlife at 18°C: 30 days
Cure: Autoclave, press cure
Attributes: Versatile with low solvent content, pliable with medium tack, excellent surface finish
-
![]()
PFC502
Type: PFA thermoset
Bio resin content: 90%
Initial cure Temp: 130 - 160°C
Minimum cure: 10 - 100 minutes
Service Temp: Up to 200°C
Outlife at 18°C: 14 days
Cure: Autoclave, press cure
Attributes: Low toxicity and low VOC emissions with excellent FST performance
-
![]()
EPC200
Type: Toughened epoxy
Bio resin content: 20%
Initial cure Temp: 65 - 120°C
Minimum cure: 30 min to 12 hours
Service Temp: 120°C
Outlife at 18°C: 21 days
Cure: Out-of-autoclave
Attributes: Flexible cure cycles from low-temp, out-of-autoclave to high-temp rapid processing
-
![]()
EPC300
Type: Toughened epoxy
Bio resin content: 20%
Initial cure Temp: 80 - 120°C
Minimum cure: 1 - 12 hour
Service Temp: Up to 130°C
Outlife at 18°C: 30 days
Cure: Autoclave, press cure
Attributes: Medium-temp cure, excellent adhesion to core materials, excellent surface finish
-
![]()
EPC312FR
Type: Toughened epoxy
Bio resin content: 0%
Initial cure Temp: 120°C
Minimum cure: 2 hours
Service Temp: Up to 120°C
Outlife at 18°C: 30 days
Cure: Autoclave, press cure
Attributes: Flame retardant up to UL94V0
